Lightning Arrester Manufacturer In India
Looking for a trusted lightning arrester manufacturer in India? We provide high-quality lightning protection solutions to safeguard buildings, industries, and infrastructure from electrical surges caused by lightning strikes. Our advanced lightning arresters ensure maximum safety by effectively diverting high-voltage surges to the ground, preventing damage to electrical systems and structures.
At Reli projects, we are the leading lightning arrester manufacturer In India, it is a device used on electrical power systems to protect the insulation of transformer and conductors of the system from the damaging effects of lightning. The typical Lightning Arrester has a high-voltage terminal and a ground terminal. When a lightning surge (or switching surge, which is very similar) travels along the power line to the arrester, the current from the surge is diverted through the arrestor, in to earth.
How Do Lightning Arrester Manufacturer In India Work?
All appliances and electrical devices have a fixed voltage range. Reliprojects, a renowned lightning arrester manufacturer in India, is a band of operating voltages that indicates the range at which a particular device is designed to safely operate within. If the voltage received by a device is higher than its recommended voltage range, the device may malfunction, its internal components damaged, and even blow up in a worst-case scenario.
Types of Lightning Arrester Manufacturer In India
We provide high quality, low cost products for utility systems. As a trusted lightning arrester manufacturer in India, we offer:
HV Lightning Arrester (Up to 245 kV)
- Proven moisture sealing technology .
- Non-tracking insulating silicone materials.
- Fully integrated single piece and void less design
- Safe mode of failure
LV Lightning Arrester (Up to 440 V)
- Suitable for indoor and outdoor applications
- Integrated disconnector and 1m line lead
- Overhead lines housing and lead are flame retardant and UV resistant
- Easy to identify failure indicator
MV Lightning Arrester (Up to 36 kV)
- Excellent TOV performance.
- Safe, non-shattering failure in short circuit test
- Higher energy handling capability
- Crimped structural construction is light in weight, provides optimal mechanical strength
Capacitive Voltage (Up to 1200 kV)
- Self Contained
- Maintainence Free
- Rerquires no spares over its entire life span
Transmission Line Lightning Arrester (Up to 400kV)
- Arrester is built with short circuit fail safe characteristics
- Transmission line disconnector offered along with arrester
- Recommend suitable number of arresters and their positioning to minimize outages
- TLA installed on towers subject to clearance
Current Transformer (Up To 800 kV)
- Hermetically sealed construction
- Shielded cores and secondary windings
- Stainless steel metallic bellows for oil volume compensation and health indication
- Rigid and welded primary construction for abilities to withstand excessive dynamic currents
- Excellent thermal stability of insulation
- Metallic flanges are cemented to porcelain to give uniform load distribution.
Condenser Bushing (Up To 800 kV)
- Shatterproof epoxy resin cast oil end insulator
- Partial discharge free performance at power frequency test voltage when tested on turret size tanks
- Large size oil indicator with float for better visibility
- Dielectric loss less than 0.005
- Provision for oil sampling at mounting flange level for health monitoring
Polymeric Lightning Arrester:
We supply polymeric lightning arresters of various voltage ratings, ensuring top-notch performance and durability:
- 120kV Polymeric Lightning Arrester
- 30kV Polymeric Lightning Arrester
- 65kV Polymeric Lightning Arrester
- 624kV Polymeric Lightning Arrester
- 390kV Polymeric Lightning Arrester
- 360kV Polymeric Lightning Arrester
- 336kV Polymeric Lightning Arrester
- 216kV Polymeric Lightning Arrester
- 198kV Polymeric Lightning Arrester
- 96kV Polymeric Lightning Arrester
| SEGMENTS | VOLTAGE RATING (kV) | CURRENT (KA) |
| LT ARRESTERS ( Indoor Polymer Lightning Arresters For Panel & Motor Application) | 0.5 KV TO 12 kV | 1.5 kV / 5 KA |
| LV ARRESTERS (DISTRIBUTION CLASS) | 0.5 kV TO 36 kV | 5 / 10 KA, CLASS 2 / 3 |
| HV ARRESTERS (STATION CLASS) | 36 kV TO 216 kV | 10 / 20 KA, CLASS 2 / 3 / 4 |
Characteristics of Lightning Arrester Manufacturer in India
- The voltage across this arrester where the current flow is interrupted after spark over, this is known as resealing voltage.
- It has the highest power frequency which ranges 50 Hz/60 Hz
- Maximum constant operating voltage
- Rated short circuit current
- Nominal discharge current and the values are 5 kA, 10 kA & 20 kA.
- These are connected among the life conductors as well as the earth.
- While installing the arresters with above 52 kV, Lightning Arresters manufacturer in India may be supplied by discharge operation counters.
